The purpose of this project is to design and mass-produce kits for a floating tiny house that can sail. It combines high-tech modeling and fabrication and low-tech assembly that can be carried out DIY-style on a riverbank or a beach. This boat is a four-bedroom with a kitchen, a bathroom/sauna, a dining room and a living room. The deck is big enough to throw dance parties. It can be used as a river boat, a canal boat or even a beach house. It's rugged and stable enough to take out on the ocean.

About

HULL TYPE: SAILING BARGE
LOA: 37 FT • LOD: 36 FT • LWL: 35 FT • BEAM: 16 FT
STEERING: KICK-UP RUDDER AND CENTERBOARD
RIG TYPE: CHINESE JUNK • SAIL AREA: 1000 SQ FT
DRAFT: BOARD DOWN 7 FT, BOARD UP 1.5 FT
DISPLACEMENT: 12 TONS • GROSS TONNAGE: 25 TONS
BALLAST: WATER, 8 TONS
CONSTRUCTION: FIBERGLASS OVER MARINE PLYWOOD
BUILD TYPE: MANUFACTURED KIT, RAPID DIY ASSEMBLY
ENGINE: 50 OR 60 HP OUTBOARD IN INBOARD WELL
CRUISING SPEED: 6 KNOTS • MAX SPEED: 7.5 KNOTS
WATER: 2000 GALLONS • GASOLINE: 50 GALLONS
PROPANE: 2 20-LB CYLINDERS IN VENTED LOCKER
ACCOMMODATIONS: SLEEPS 8 ADULTS, 4 WITH PRIVACY
LAYOUT: 2 AFT CABINS, VESTIBULE, GALLEY, HEAD, SALON, 2 PILOT BERTHS, STATEROOM